동영상 캡처¶
참고
At least Firewire and webcam capture were removed in porting to KDE 5 due to lack of manpower.
Kdenlive provides functionality for capturing video from external devices; e.g., Firewire, FFmpeg, Screen Grab and Blackmagic.
You configure video capturing from Kdenlive 설정).
(more on thisYou define the destination location for your captures by using Kdenlive 설정).
(more on thisTo execute a video capture, select the 모니터 and choose the capture device from the dropdown in the bottom right.
파이어와이어¶
참고
This option is not available in recent versions of Kdenlive. Use dvgrab directly in a terminal to capture video from firewire.
This captures video from sources connected via a firewire (also known as - IEEE 1394 High Speed Serial Bus) card and cable. This functionality uses the dvgrab program and the settings for this can be customized by clicking the spanner icon or choosing . See Kdenlive 설정.
캡처 실행 방법:
Plug in your device to the firewire card and turn it on to play mode
Click the Connect Button
Click the Record Button – note it toggles to grey while you are recording
Click the Record button again to stop capture. Or click the stop button.
Once capturing is finished, click the disconnect button
In the Captured Files dialog, click the import button to have the captured files automatically imported into the project bin.
참고
If your device does not start playing the source device when you click the record button, you may have to start playback on your device manually and then click record.
FFmpeg¶
I believe this captures video from an installed Web Cam using Video4Linux2.
화면 녹화¶
This captures video of the PC screen.
Open screen grab:
.Start recording: click the “record” button.
Stop record: click the “record” button again.
The recorded clip will be added in the project bin.
Settings can be adjusted in Kdenlive 설정
To check on your linux distro, type ffmpeg -version
in a terminal and look for --enable-x11grab
in the reported configuration info. [1]
If you are capturing the screen and using the X246 with audio settings and you get a crash as shown in the screen shot…
…then consider creating a profile for audio capture where -acodec pcm_s16le
is replaced by -acodec libvorbis -b 320k
. See Kdenlive 설정.
Blackmagic¶
This is for capturing from Blackmagics decklink video capture cards (AFAIK). Not sure how stable this code is at the moment. Mentioned in legacy Mantis bug tracker ID 2130.