VR360 Hemispherical to Equirectangular¶

Description

This effect/filter converts a video frame with two hemispherical images to a single equirectangular frame.

The plugin assumes that both hemispheres are in the frame. If you have a camera like the Garmin Virb360 that produces two videos, one from each camera, you should start by converting them to a single movie by placing them side by side using, for example, ffmpeg (you can also add parameters to produce lossless, intra-only output here for easier editing):

ffmpeg \
 -i left.mp4 \
 -i right.mp4 \
 -filter_complex hstack \
 output.mp4

Parameters

Parameter	Value	Description
Projection	Selection	The fisheye projection type
Interpolation	Selection	Determines the sampling method
Alignment Yaw / Pitch / Roll	Integer	Adjust the rotation along the Z- (yaw), X- (pitch) and Y-axis (roll) to compensate for any alignment differences
Lens FOV	Integer	Field of View of a single hemisphere in degrees
Lens Radius	Float	Radius of the image circle as a fraction of the frame width (for example 0.25 = 25% of 1920)
Front X / Y	Float	Defines the center of the image of the front-facing camera. X is expressed as a fraction of the image width, Y as a fraction of the image height.
Front UP	Integer	Defines the «up» direction in the image in degrees counting clockwise from a directions towards the top edge
Back X / Y	Float	Defines the center of the image of the back-facing camera. X is expressed as a fraction of the image width, Y as a fraction of the image height.
Back UP	Integer	Defines the «up» direction in the image in degrees counting clockwise from a directions towards the top edge
Nadir Radius / Start	Float	Adjust the nadir of the camera if you have parts of the camera or equipment in the image

The following selection items are available:

Projection

Equidistant Fisheye

default

Interpolation

Nearest-Neighbor	default
Bilinear