Reductor de ruido FFT 3D¶
Descripción
Este efecto permitirá reducir el ruido en la imagen de un clip, usando un filtrado de tipo 3D FFT (Fast Fourier Transform o transformada rápida de Fourier) 3D en el dominio de las frecuencias[1].
Parámetros
Parámetro |
Valor |
Descripción |
|---|---|---|
Sigma |
Entero |
Set the noise sigma constant. This sets denoising strength. Default value is 1. Allowed range is from 0 to 30. Using very high sigma with low overlap may give blocking artifacts. |
Intensidad |
Decimal |
Set amount of denoising. By default all detected noise is reduced. Default value is 1. Allowed range is from 0 to 1. |
Tamaño de bloque |
Entero |
Set size of block in pixels, Default is 4, can be 2 to 6. |
Solapamiento |
Decimal |
Set block overlap. Default is 0.5. Allowed range is from 0.2 to 0.8. |
Método |
Selección |
Set denoising method |
Add previous frame to temporal denoising (Agregar fotograma anterior a la reducción temporal) |
Interruptor |
Check to include previous frame in denoising. Default is off. |
Add next frame to temporal denoising (Agregar fotograma siguiente a la reducción temporal) |
Interruptor |
Check to include next frame in denoising. Default is off. |
Planos |
Selección |
Set planes which will be filtered, by default all available are filtered except alpha. |
Los siguientes elementos se encuentran disponibles para ser seleccionados:
Método
Wiener |
Predeterminado |
Definido |
Planos
Ninguno |
|
Y |
|
U |
|
YU |
|
V |
|
YV |
|
UV |
|
YUV |
Predeterminado |