3D FFT Denoiser¶
Descrizione
This effect/filter denoises frames using 3D FFT (Fast Fourier Transform) frequency domain filtering[1].
Parametri
Parametro |
Valore |
Descrizione |
|---|---|---|
Sigma |
Intero |
Set the noise sigma constant. This sets denoising strength. Default value is 1. Allowed range is from 0 to 30. Using very high sigma with low overlap may give blocking artifacts. |
Importo |
Virgola mobile |
Set amount of denoising. By default all detected noise is reduced. Default value is 1. Allowed range is from 0 to 1. |
Blocco |
Intero |
Set size of block in pixels, Default is 4, can be 2 to 6. |
Sovrapposizione |
Virgola mobile |
Set block overlap. Default is 0.5. Allowed range is from 0.2 to 0.8. |
Add previous frame to temporal denoise |
Interruttore |
Check to include previous frame in denoising. Default is off. |
Add next frame to temporal denoise |
Interruttore |
Check to include next frame in denoising. Default is off. |
Piani |
Selezione |
Set planes which will be filtered, by default all available are filtered except alpha. |
Sono disponibili le seguenti voci di selezione:
Piani
Nessuno |
|
Y |
|
U |
|
YU |
|
V |
|
YV |
|
UV |
|
YUV |
Predefinito |
Alfa |