Bearbeitung

Editing is done in the Zeitleiste. Add a clip by dragging it from the The Project Bin or the Monitors. Once a clip is dropped on a track, it can be moved (drag and drop it) to another place on the same track or onto another track.

add clip to timeline

Neu in Version 19.08.0: Editing with keyboard shortcuts was introduced

This will speed up the editing work and you can do editing steps that are not possible or not as quick and easy with the mouse. Working with keyboard shortcuts in 19.08 is different as in the former Kdenlive versions. Mouse operations have not changed and working as before. See 3 Point Editing

Seeking through your project

The timeline cursor shows your current position in the project. The positions of the cursors on the timeline ruler and Project Monitor are always in sync. Position can be moved in the following ways:

  • Keyboard shortcut: right / left arrows for one frame, Shift+ right / left for 1 second

  • Clicking/dragging in the Zeitleiste or in an empty area of the timeline.

  • Clicking/dragging in the Monitors ruler.

  • Rotating the mouse wheel while the pointer is over the Zeitleiste or over the Monitors

  • Editing the timecode in the Monitors timecode widget

  • Clicking the up or down arrows on the Monitors timecode widget

Cutting a clip

To cut a clip, the easiest way is to place the timeline cursor where you want to cut the clip, then select the clip (left click in it) and use the menu Timeline ‣ Current Clip ‣ Cut Clip (default shortcut: Shift + R).

Or Right Click ‣ Cut Clip

Alternatively - use the Spacer Tool.

Resizing a clip

A clip can be resized from its start or end by dragging its left or right edge. If you want a more precise resize, you can place the timeline cursor wherever you want the resize to end and use the menu Timeline ‣ Resize Item Start (default shortcut: ( or Timeline ‣ Resize Item End (default shortcut: ))

To even more precisely control the length of a clip, double click it in the timeline and adjust its duration using the Clip duration dialog. You can have frame-level accuracy with this method.

clip duration

You can also resize a clip by cutting it with the Razor Tool and then deleting the bit you do not want.

Neu in Version 19.08.

Adjust AV clips independently with Shift + resize to resize only audio or video part of a clip.

alt + Move in timeline allows to move the audio or video part to another track independently.

av-metamove

Change speed of a clip

Neu in Version 19.08.

adjustspeed

Adjust the speed of a clip by pressing CTRL + dragging a clip in the timeline.

Doing with right click on the clip see Change speed.

Removing Space Between Clips

Right click in the space between the clips and choose Remove Space. Be aware however that if you have clips on multiple tracks in the timeline and they are not grouped, then removing space may disturb the alignment of the clips between the different tracks – the space is only removed from the timeline where you clicked. Under this situation it may be safer to use the Spacer Tool.

remove space

Timeline Toolbar

There is a toolbar between monitors and the timeline that controls various aspects of the editor.

Middle Toolbar ver  21.04
  1. Track Compositing drop down.

1a. None

1b. Preview

1c. High Quality

1d. Mixed Audio tracks changes the order in which tracks are displayed to mixed audio and video tracks. For example, from the bottom of the timeline to the top of the timeline: A1, V1, A2, V2, A3, V3

1e. Split Audio tracks changes the order in which tracks are displayed to separate audio and video tracks. For example, from the bottom of the timeline to the top of the timeline: A1, A2, A1, V1, V2, V3

1f. Split Audio tracks (reverse) changes the order in which tracks are displayed to separate audio and video tracks with the audio tracks in reverse order. For example, from the bottom of the timeline to the top of the timeline: A1, A2, A3, V1, V2, V3

  1. Timeline Edit Mode Drop Down. These same settings can be found under the Tool menu.

2a. Timeline Normal Mode

2b. Timeline Overwrite Mode

2c. Timeline Insert Mode

  1. Use timeline zone timeline-use-zone-on / Do not use timeline zone timeline-use-zone-off for insert (toggles). See :Insert and Overwrite: advanced timeline editing for more details.

Tool Group (one of these 3 can be active)

Active buttons are grey.

  1. Selection Tool - Also selected with the ‚S‘ hotkey. Allows the selection and manipulation of clips on the timeline

  2. Razor Tool - Also selected with the ‚X‘ hotkey, or to cut at the point of the play head use „Shift-R“. This allows a clip to be cut into two clips.

  3. Spacer Tool - Also selected with the ‚M‘ hotkey. This tool will select all clips at one point in the timeline and allow them to be shifted at once.

  4. Position indicator - displays the time point or frame number of the location of the hovering mouse on the left side, and the total length of the project on the right side.

7a. hh:mm:ss:ff; Sets the position indicator to display time units

7b. Frames Sets the position indicator to display frames

  1. Mix Clips - allows same-track transitions to be applied between two clips. See Mixes for a detailed explanation.

  2. Insert Clip Zone in Timeline. See Insert and Overwrite: advanced timeline editing for more details.

  3. Overwrite Clip Zone in Timeline. See Insert and Overwrite: advanced timeline editing for more details.

  4. Extract Timeline Zone

  5. Lift Timeline Zone

  6. Favourite Effects

  7. Start Preview Render

14a. Stop Preview Render

14b. Add Preview Zone

14c. Remove Preview Zone

14d. Remove All Preview Zones

14e. Automatic Preview

14f. Disable Timeline Preview

14g. Manage Cached Data

Neu in Version 22.04:

Preview Using Proxy Clips

14h. Preview Using Proxy Clips. Option to render preview using original clips, not proxies (disabled by default).

Items 14, 14a-14g are covered in detail by Timeline preview rendering article.

  1. Show/Hide the Audio Mixer tool. The audio mixer tool allows audio to be managed in the project.

  2. Show/Hide the Untertitel Tool. This will show or hide the subtitle track where subtitles can be created or edited in the project.

Track Compositing

The track compositing applies uniformly to all tracks in your timeline.

Tipp

Under certain compositing conditions, if you see the outcome of a transition not to be what you would expect, try to switch track compositing off for a quick check. If the oddity is gone, then this is an interference between the automatic timeline track compositing and your user transitions.

None

When Track Compositing is set to None you will not get tracks with alpha channel information to composite with the other tracks unless an explicit composite or affine transition is added between the clips. This is basically kind of an expert mode when you need full control over any compositing in your timeline.

Preview

Veraltet ab Version 21.08.

Bemerkung

Final rendering always uses either High Quality or None. So Preview quality is, well, for preview only.

When track compositing is set to Preview tracks with alpha channel information will be automatically composited with the other tracks using an algorithm that is somewhat faster than the algorithm used with High Quality but which slightly degrades the colors.

High Quality

When track compositing is set to High-Quality tracks with alpha channel information will be automatically composited with the other tracks using an algorithm that is somewhat slower than the algorithm used with Preview but which retains higher fidelity color information.

Timeline Edit Modes

Normal Mode

In this edit mode, you can not drag clips on top of other clips in the same track in the timeline. You can drag them to another track in the timeline but not into the same track at the same time point as an existing clip. Contrast this to overwrite mode.

Overwrite Mode

In this edit mode, you can drag a clip onto a track where there is an existing clip and the incoming clip will overwrite that portion of the existing clip (or clips) covered by the incoming clip.

kdenlive_overwrite_mode_after01

Before

kdenlive_overwrite_mode_after01

After

In the „After“ screenshot above, you can see that the clip which was dragged from the upper track has replaced a portion of the clip on the lower track.

Rearrange clips in the timeline

Performing a rearrange edit. This technique lets you quickly change the order of clips in the timeline.

Overwrite-mode

Drag a clip, as you drop it to a new location performs an overwrite edit that overwrites the existing clip.

Insert Mode

With this mode selected and you drop a selection into the timeline the selection will be inserted into the timeline at the point where the mouse is released. The clip that the selection is dropped on is cut and clips are moved to the right to accommodate the incoming clip.

Kdenlive_Insert_mode0before

Before

Kdenlive_Insert_mode1before

During

Kdenlive_Insert_mode1after

After. Incoming Clip inserted. Clips after the insert point are shifted Right

Rearrange edit in the timeline

Performing a rearrange edit. Only clips in the destination track are shifted; clips in other tracks are not affected. This technique lets you quickly change the order of clips in the timeline.

It always closes all space in the track.

Insert-mode

Drag a clip, as you drop it to a new location. Releasing the clip performs an insert edit that shifts clips in the destination track only.

Timeline Edit Tools

Selection Tool

Use this to select clips in the timeline. The cursor becomes a hand when this tool is active.

Razor Tool

Use this to cut clips in the timeline. The cursor becomes a pair of scissors when this tool is active.

ESC: Return from any tools back to Selection tool.

Spacer Tool

Use this tool (distribute-horizontal) to temporarily group separate clips and then drag them around the timeline to create or remove space between clips. Very useful. Experiment with this tool to see how it works.

spacer tool crop

In the above example, these clips are not grouped. However, the spacer tool groups them temporarily for you so you can move them all as a group.

ESC: Return from any tools back to Selection tool.

Neu in Version 21.12.

Slip Tool

slip tool

Slip keeps the original duration of the clip. Like working with old film material: beneath the given „window“ of the clip length it slips the film strip back and forth.

slip tool in action

Use Slip (kdenlive-slip) to trim, in a single operation, the IN and OUT points of a clip forward or backward by the same number of frames, while keeping the original duration and without affecting adjacent clips.

You can slip multiple clips at once now: select all clips you want to slip with the selection tool using Shift then enable the slip tool and go ahead…

Slip can be done with the mouse, with the arrow keys and with the buttons on the monitor toolbar.

ESC: Return from any tools back to Selection tool.

Ripple Tool

ripple tool

Ripple changes the original duration of the clip. Like working with old film material: You lengthen or shorten the film strip and move the adjacent clips back and forth as you do that.

Use Ripple (kdenlive-ripple) to trim a clip and shift following clips in the track by the number of frames you trim. When you shorten a clip by this action all clips that follow the cut shift back in time, contrariwise, when you extend a clip the clips after the cut shift forward in time. If an empty space is on the track it behaves as a clip and it shifts in time as a standard clip would be.

You can Ripple only a single clip at once.

Ripple can be done with the mouse only.

ESC: Return from any tools back to Selection tool.

Multicam Tool

multicam tool

Add your clips in different tracks, but at the same position in the timeline and activate the multicam tool by going to menu Tool -> Multicam tool. You may trim the clips in the desired track while the timeline is playing by pressing their corresponding numbers (for track V1, press key 1; for track V2 press key 2, etc…) or simply select the desired track in the project monitor by clicking on it with the mouse.

Select multicam tool will switch on the multitrack view in the project monitor and set a marker at the current timeline position. You can then seek/play to the wanted position, click on a track view in the project monitor and it will lift all tracks except for the previously active track. You can then repeat seek and click in another track to continue lifting tracks.

It doesn’t stop playing when you perform the operation to avoid to lose the rhythm and to work as you are working during a live broadcasting. If you need to correct the editing you can manually stop and trim the cut as you do when you video editing as normal.

The audio tracks is not involved in the process as you generally use only one audio track (the one which come from the main mixer to which the other ones are synced to)

ESC: Return from any tools back to Selection tool.

Status Bar

Bottom toolbar ver 17.04
  1. Split Audio and Video Automatically

  2. Automatic Transitions

  3. Show Video Thumbnails

  4. Show Audio Thumbnails

  5. Show marker comments

  6. Snap

  7. Fit Zoom to Project

  8. Zoom Out

  9. Zoom Project

  10. Zoom In

Split Audio and Video Automatically

When this is on and you drag a clip to the timeline, the audio in the clip will end up on an audio track and the video on a video track. You can achieve the same result if you select the clip, Rechtsklick, Split Audio. When this is off and you drag a clip onto the timeline, both the audio and video tracks are combined into one video track.

Automatic Transitions

When active any transitions added to the timeline will have the automatic transition option checked by default. See Transitions

Show Video Thumbnails

When on, the video clips in the timeline will contain thumbnails as well as a filename. Otherwise, they just have the clip filename.

When the timeline is zoomed in to the maximum, the video track will show a thumbnail for every frame in the clip. When the timeline is not on maximum zoom, the video track will show a thumbnail for the first and last frame in the clip.

Show Audio Thumbnails

When on, the audio clip will have a wave representation of the audio data as well as a filename. Otherwise, they just have the clip filename.

Show marker comments

This toggles on and off the display of the comments saved within Clips (the text with the gold background in the example below) and within Guides (the text with the purple background).

markers and guides

Snap

When this feature is on, dragging the beginning of one clip near to the end of another will result at the end of the first clip snapping into place to be perfectly aligned with the beginning of the second clip. As you move the two ends near to each other, as soon as they get within a certain small distance, they snap together so there is no space and no overlap. Note that this occurs even if the clips are on different tracks in the timeline.

Clips will also snap to the cursor position, markers and Guides.

Fit Zoom to Project

This will zoom the project out so that it all fits in the timeline window. This is the same function that is triggered by Timeline Menu Menu item, Fit Zoom to Project.

Zoom project

The magnifying glasses zoom in or out on the timeline. The slider adjusts the zoom by large increments. These same settings are controlled by the Timeline menu items, Zoom In and Zoom Out.

Cutting Footage from multiple aligned tracks - Ripple Delete

This is available on the Timeline menu under All clips ‣ Ripple Delete 1 .

Seems missing in Kdenlive 17.04 & 18.04

Mark In and Out points in the Project Monitor, then choose Timeline ‣ All clips ‣ Ripple Delete (or Ctrl + X). Kdenlive deletes all footage between the In and Out points in unlocked tracks, slides everything else back to fill the gap, and puts the playhead on the In point.

3 point editing

Neu in Version 19.08.0.

3 important points to understand the 3 point editing concept (with keyboard shortcuts):

Source

3point source

On the left of the track head the green vertical lines (V1 or A2). The green line is connected to the source clip in the project bin. Only when a clip is selected in the project bin, the green line shows up depending on the type of the clip (A/V clip, picture/title/color clip, audio clip).

Target

3point target

In the track head the target V1 or A1 is active when it’s yellow. An active target track reacts to edit operations like insert a clip even if the source is not active.

The concept is like thinking of connectors

Connect the source (the clip in the project bin) to a target (a track in the timeline). Only when both connectors on the same track are switched on the clip “flow” from the project bin to the timeline.

Wichtig

Active target tracks without connected source react on edit operations.

Examples of advanced edit

Here is a brief introduction to the 3 point editing system.

3point insert
  1. Select a clip in the project bin with an up/down arrow

  2. Navigate the clip by the JKL keys or by the left/right arrows and set the IN and the OUT point by the I and O keys.

  3. Hit T to change to the timeline

  4. Select a video or audio track in the timeline (up/down arrow key) and set it as source with Shift + T.

  5. Activate the track as a target with shortcut A (this connects the track to the source)

  6. Hit V (insert) or B (overwrite) to add the clip at the play-head position or to fill the selected area in the timeline if it is active. If you need to activate it use the G key.

3point edit

In the following example, we want only to insert the audio part of a clip in A2 and we want to create a gap in all the other video and audio tracks:

  1. Activate all the target tracks which contain clips (yellow buttons).

  2. Activate just the audio source on A2

  3. Press V (insert).

1

available on bleeding edge version > 0.9.10 (Jan2015)